Ametek DMS-3K, Installation & Operation Manual

Page: 28 / 206

16
Code Operational Sequence
A, A4, M, R, R-12, F1A, F3A, F2M-1, FFAM2 (select one or use IMO option for multiple)
IMO Multiple Sequences, provide matrix
Code Display Cables
NR No Display Cables
PT Point to Point pig tail, 32 inputs/cable
Indicate qty of cables, type of
cable and length
Ex. 4PT25 , 2SC15
STY Integral plug connector, 32 inputs/cable
SC RS-232/485 Serial Cable
Code Control Pushbuttons
CS Customer Supplied (Test, Ack, Sil, Reset)
DC Pushbuttons on Display (Test, Ack, Sil, Reset)
Code Options
All systems include an RS-232/485 serial port and RJ45 Ethernet port that can operate with the protocols
below.
A WEB Browser is provided for system configuration.
WEB WEB display of Active Alarms and Events
IB IRIG-B Time Sync
NTP NTP Time Sync
1588 IEEE 1588 Time Sync
EM Email on alarm
MB Modbus Protocol RTU, TCP/IP(Master/Slave)
DNP DNP Protocol (Slave)
ASC ASCII Protocol
BAC BACnet Protocol
CR Combine up to 16 Racks in a system
This option is only required on one rack/system
Sample Model Number
DMS-3K-SR-B-X-1A/4B/4F/1L-A-2SC20-CS-IB/WEB//CR/MB
SR Single Chassis Rack (3U) - 19" Rack Mount [10 I/O Card Slots]
B 115 VAC Power, 24 VDC FCV
X 24 VDC FCV (AMETEK Supplied)
1A/4B/4F/1L
(1) 8 Input/Output, screw terminal (DC FCV only)
(4) 16 Input, screw terminal (DC FCV only)
(4) 16 Output, screw terminal, NPN sink
(1) 5 Output power relay, screw terminal
A Sequence A
2SC20 (2) RS-232/485 Serial Cable, 20FT
CS Customer Supplied (Test, Ack, Sil, Reset)
IB/WEB/CR/MB
IRIG-B Time Sync
WEB Based Alarm Display
Combined System – Up to 16 Logic Card Racks in one System
Modbus RTU, TCP/IP, Master/Slave