Ametek DMS-3K, Installation & Operation Manual

Page: 61 / 206

Page 49
Chapter 3. DMS-3K Web Browser Configuration
The DMS-3K has a built-in WEB server that can be used with your Web browser client such as
Internet Explorer or Firefox for displaying your alarms and unit configuration. Refer to Appendix F for
compatibility requirements and browser configuration.
Launch your browser and type in your unit’s IP address. The DMS-3K is shipped with a default
address of: http://192.168.250.100
A User ID/Password dialog box will pop up as shown in Figure 3–1.
The DMS-3K has two levels for access and can be configured as shown, later in this chapter. The
default username is: admin with password: admin and user: user. The unit’s home page will be
displayed where you can view and access all the features of the unit, depending on your user account
rights.
Figure 3–1. DMS-3K Login Dialog Box
Note: Your system or network administrator must set up the user accounts. There are two basic
types, Admin and User. An Administrator account has full rights and can change anything. The User
account has limited rights and cannot change passwords, apply or discard changes. Some action
buttons will be grayed out under a User account.