Ametek AMEVision 3050-TE, User Manual

Page: 42 / 84

4-6 | 3050-TE Moisture Analyzer
Parity and Stop Bits
For Modbus serial communications select the Parity and Stop Bits parameters for your
analyzer. The 3050 analyzer can only operate at the four combinations listed below.
Saving Your Settings
To save settings on the General tab, click Apply.
To abort changes you have made, click
Cancel
. This will close the Configurator
software program.
PC Communications
Once the device communication settings are changed, the
PC Communications
setup screen will automatically open. Select the approciate options that correspond
to the communciation setting on the device and press OK .
It will take a few seconds to establish communication and display
Online
in the
Status
field on the
General
Tab.
If communitcation is lost, recycle power on the analyzer and click Setup
on the General Tab to change the PC Communications.
Parity Stop Bits
O dd 1
Even 1
N one 1
N one 2
Figure 4-3b.
Device

NOTE