Ametek AMEVision 3050-TE, User Manual

Page: 40 / 84

4-4 | 3050-TE Moisture Analyzer
Status
Indicates if the analyzer is on-line, off-line, or in demo mode.
On-Line
The PC and analyzer are connected and communicating properly.
Off-Line
The
Live Data
box is checked on the
General
tab and the con-
nection is broken or off-line.
Demo Mode
The
Live Data
box is not checked on the
General
tab. No analyzer
is connected through the serial port. This allows you to exercise
program options without communication with the analyzer.
Serial Numbers
The analyzer name and analyzer software version are displayed on the first line in the
upper right-hand corner. The
analyzer serial number
and
sensor serial number
,
and the
moisture generator
and
dryer codes
are also displayed.
In the lower right-hand corner, above the
Help
button, is the
Configurator soft-
ware version number
.
Saving Your Settings
To save settings on the
General
tab, click
Apply.
To abort changes you have made, click
Cancel
. This will close the Configurator
software program.
Clicking OK or CANCEL will close the configurator application.
Device Communications Tab
For initial setup of PC communication parameters, use the Setup button
on the General tab.
Configuring Multiple Analyzers
Use the
Device Communications
tab to set the analyzer’s communication pa-
rameters to agree with the PC settings when controlling analyzers in a daisy chain.

NOTE

NOTE