Ametek AMEVision 3050-TE, User Manual

Page: 47 / 84

PC Interface | 4-11
Figure 4-8.
Dryer and Moisture
Generator code entry
screens.
and the time (1 through 24) in the Hour slot to begin zero cycle.
Scheduled Zero
Schedule routine Zeros by clicking the Daily , Weekly , or Monthly button
Never No zero cycle will be done. Scheduling slots at the bottom of the
box are not available.
Daily Select the time of day by entering a number in the Hour slot at the
bottom of the box.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
Weekly Select the day of the week from the drop-down list under Day of
the week at the bottom of the box. You must also enter a time of
day (1 through 24) in the Hour slot to begin the zero cycle.
Monthly Enter the numeric (1 through 28) day of the month in the Day slot,
and the time (1 through 24) in the Hour slot to begin zero cycle.
Saving Your Settings
To save settings on the Schedule tab, click Apply.
To abort changes you have made, click Cancel . This will close the Configurator
software program.
Status Tab
Use the Status tab to view current readings and the status of the analyzer.

NOTE