Ametek AMEVision 3050-TE, User Manual

Page: 38 / 84

4-2 | 3050-TE Moisture Analyzer
General Tab V2.0
Use the General tab to view the current configuration and define parameters for
the analyzer and for PC communications (Figure 4-1).
After communication with analyzer is established, any changes to the
analyzer communications parameters must be made using the Device
Communications tab. These changes must be made before you make any
changes to the computer serial port settings.
PC Communications
Click the
Setup
button to configure
PC Communication
s. The
Serial Port Com-
munication
screen opens (Figure 4-2).
Communication Protocol
Select AMETEK Serial for inital PC communication setup. Once
communications with the analyzer are established, the Modbus
serial can be selected if desired.
When changing from AMETEK Serial to Modbus Serial, the analyzer
communications parameters must be changed before the computer serial
port settings.

NOTE
Figure 4-1.
General tab
Configurator software.
Figure 4-2.
PC Serial
Communications setup
screen.
2.2

NOTE