American Megatrends MegaRAC G4, User Manual

Page: 55 / 66

Appendix D: SMASH Command Line Utility 45
List of commands:
SMASH has in all 11 commands for the user. The OEMs can add their own commands to
SMASH provided they prefix their commands with “OEM_”.
The commands are as follows:
Table 1: Command List
Command Requirement Definition and usage
cd MUST Used to set the Current Default Target (navigate the target address space of the
MAP).
Create PROFILE Used to create new instances and associations in the address space of the MAP
This is only allowed for specific target object types as defined by the profiles
and specific MAP implementation.
Delete
PROFILE Used to destroy instances in the address space of the MAP. This is only allowed
for specific target object types as defined by the profiles and specific MAP
implementation.
dump
PROFILE Move a binary image from the MAP to a URI.
exit MUST Used to terminate a CLP session.
help MUST
Used to get context sensitive help. The functionality is the same as the – help
option with the addition of help for targets.
load PROFILE Move a binary image to the MAP from a URI.
reset PROFILE Used to cause a target with power/process control to cycle states from enabled
to disabled and back to enabled.
set MUST Used to set a property or set of properties to a specific value.
show MUST Used to show values of a property or contents of a collection/target.
start PROFILE Used to cause a target with power/process control to change states to a higher
run level.
stop PROFILE Used to cause a target with power/process control to change states to a lower
run level.
version
MUST Used to query the version of the CLP implementation (by default) and other
CLP elements (when specified).