MegaRAC® G4 User’s Guide
10
Setup your Client System’s Internet Browser
You must first set up Internet Explorer browser on the client system before you can
redirect the host system’s console. Set up Internet Explorer’s
Security Settings
to
allow
the downloading of Signed ActiveX controls
and also allow it to
run Signed ActiveX
controls
. See the
MegaRAC® G4 User’s Guide
located on the
MegaRAC® G4 CD
for
more information.
Note:
At the time this document was being created, the MegaRAC® ActiveX controls were in
the process of being “signed” (by VeriSign®) so that they could be authenticated by
Internet browsers. If redirection does not operate properly, you may have to set up
Internet Explorer’s
Security Settings
to
allow the downloading of Unsigned ActiveX
controls
and also allow it to
run Unsigned ActiveX controls
as well.
Step 6 Install/Boot to an Operating System
At this stage if you already have an operating system loaded on the host system, you can
boot to it. While the operating system is booting up, it will detect the MegaRAC® G4
card’s USB devices (that make device redirection possible).
The operating system will default to the standard drivers for all devices. If you are
running Linux on your host system, it will continue to use default drivers.
Summary of Contents for MegaRAC G4
