American Megatrends MegaRAC G2, User Manual

Page: 139 / 168

Appendix D : MegaRAC G2 Flash Utility
129
MegaRAC G2 Card Flash Utility,
Continued
Step Description
The Card Settings screen appears.
The Card Setting fields are explained in the table below:
Field/ Button Description
Select Card
Number
dropdown box The MegaRAC G2 Flash Utility automatically assigns a card number to the
MegaRAC G2 card that it locates in Recovery Mode . This is helpful when you are
trying to flash more than one MegaRAC G2 card. Think of the Select Card Number
dropdown box as a shortcut to other MegaRAC G2 cards that are in Recovery
Mode .
MAC Address This field allows you to specify the MegaRAC G2 card’s MAC Address.
Note: New settings are stored in the Windows registry automatically.
Note: When you specify the
MegaRAC G2
card, it is advisable to set the
MAC address back to the one indicated on the sticker physically located
on the back of the
MegaRAC G2
card’s PCB.
IP Address This field allows you to specify your MegaRAC G2 card’s IP address. The IP
address you assign is only valid during Recovery Mode.
Netmask This field allows you to specify your MegaRAC G2 card’s network mask. The
network mask you assign is only valid during Recovery Mode.
Gateway This field allows you to specify your MegaRAC G2 card’s gateway or router
address. The gateway address you assign is only valid during Recovery Mode.
Cancel Button The Cancel button allows you to cancel any new settings that are not saved.
3
OK Button The Ok button allows you to save any new settings that you have made and
continue with the flashing function.
Cont’d