American Megatrends 42 Series, User Manual

Page: 44 / 93

Diskette Boot Failure The boot diskette in drive A: is corrupt and cannot boot the
system. Use another boot diskette and follow the screen
instructions.
Display Switch Not
Proper A video switch on the motherboard must be set to either color
or monochrome. Turn the system off, set the switch properly,
then power on.
DMA Error Error in the DMA controller on the motherboard.
DMA Number1 Error Error in the first DMA channel on the motherboard.
DMA Number2 Error Error in the second DMA channel on the motherboard.
FDD Controller Failure AMIBIOS cannot communicate with the floppy disk drive
controller. Check all connections after the system is powered
down.
HDD Controller Failure AMIBIOS cannot communicate with the hard disk drive
controller. Check all connections after the system is powered
down.
INTR Number1 Error Interrupt channel 1 has failed POST.
INTR Number2 Error Interrupt channel 2 has failed POST.
Invalid Boot Diskette AMIBIOS can read the diskette in drive A:, but cannot boot the
system with it. Use another boot diskette and follow the screen
instructions.
Keyboard Is
Locked...Unlock It The keyboard lock on the system is engaged. The system must
be unlocked to continue the boot process.
Keyboard Error There is a timing problem with the keyboard. Make sure a
Keyboard Controller AMIBIOS is installed. Set the
Keyboard
option in STANDARD CMOS SETUP to Not Installed to skip
the keyboard POST routines.
KB/Interface Error Error in the keyboard connector on the motherboard.
No ROM BASIC Cannot find a proper bootable sector on either drive A: or drive
C:. Cannot find ROM Basic.
Off Board Parity Error Parity error in memory in an expansion slot. The format:
OFF BOARD PARITY ERROR ADDR (HEX) = (XXXX)
where XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
On Board Parity Error Parity error in motherboard memory. The format is:
ON BOARD PARITY ERROR ADDR (HEX) = (XXXX)
where XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
Parity Error ???? Parity error in system memory at an unknown address. Run
AMIDiag to find and correct memory problems.