American Megatrends 28 series, User Manual

Page: 61 / 126

AMI EZ-Flex Base Board User's Guide
55
POST Memory Test
Normally, the only visible POST routine is the memory
test, shown below. The amount of system memory that
passed the memory test appears in
XXXXX KB OK.
AMIBIOS (C) 1992 American Megatrends Inc.
BIOS Release - EE031392
XXXXX
KB OK
Hit <DEL> if you want to run SETUP
(C) American Megatrends
XX-XXXX-XXXXXX-XXXXXXXX-XXXXXX-XXXX-X
The first BIOS Identification String ( XX-XXXX-XXXXXX-
XXXXXXXX-XXXXXX-XXXX-X ) is displayed in the left
bottom corner of the screen. Press <Ins> to display two
additional BIOS ID strings. These strings contain the BIOS
options in a coded form.
When a problem occurs, make sure Wait for <F1> If any
Error in Advanced CMOS Setup is enabled. Then freeze
the screen by powering on the system and holding a key
down to cause a Keyboard Error message. Press <F1> to
continue the boot process. Copy the three BIOS
Identification strings on a sheet of paper before calling AMI
tech support.
The following is displayed after POST completes:
Hit <DEL> if you want to run SETUP
Press <Del> to access AMI BIOS Setup. You still must run
the EISA Configuration Utility (ECU) after running BIOS
Setup to configure EISA adapter cards.