American Innovations APM4AM-SAT WS, Installation And Configuration Manual

Page: 26 / 46

20 Chapter 2. Configuration
Figure 2-4. Channels
Channels
contains the following information:

Update / Auto Update:
Click the
Update
button to force the UCT
software to display a current reading for all input channels. Current
readings display in the
Current Read
and
Accumulator
fields.
When
Auto Update
is enabled, the UCT software displays a
current reading every 16 seconds for all input channels until
Auto
Update
is disabled.
N
OTE
:
To enable
Auto Update,
click the check box.
If dashes display in the
Current Read
or
Accumulator
fields
instead of a current reading, the input channel is either disabled
(Off) or configured in a different mode.
When the unit scans the input channels, the UCT software briefly
displays a status bar and the message “Reading input” at the
bottom of the window. The unit also emits a clicking sound as each
input channel is being scanned. Input channels are scanned by the
configuration software at regular intervals based on the hardware
sampling interval of the specific unit type.