American Innovations APM4AM-SAT WS, Installation And Configuration Manual

Page: 22 / 46

16 Chapter 2. Configuration
Main Configuration Window
The main configuration window (Figure 2-1) provides the controls to
configure the unit for service. After configuring a unit, you can use the
information on the main configuration window to monitor input channel
readings, battery voltage level, test packet transmission status, and
communications signal strength.
Figure 2-1. UCT Main Configuration Window
Two status indicators in the bottom, right hand side of the main
configuration window indicate the current operating status of the unit.
From left to right, the first indicator is green and displays continually
when using the UCT software to configure the unit. When you transmit a
test packet, the green indicator begins flashing. If communication cannot
be established, this indicator begins flashing red. The second indicator
flashes yellow when the unit transmits data. The third indicator (black) is
not currently used.
Communication Settings
Communication Settings
(Figure 2-2) shows information related to the
satellite communication network.