American Innovations APM4AM-SAT WS, Installation And Configuration Manual

Page: 34 / 46

28 Chapter 2. Configuration
Figure 2-9. Transmission Schedule
2.
To set a transmission time:
a.
Select a time in the
Transmit report at
field.
b.
Click the up or down arrow buttons to move the time forward
or backward.
3.
If you want to include an optional delay in the transmission
schedule, click the
Add Delay
check box. A check mark inside the
option box indicates the option is enabled. To disable the option,
clear the check mark by clicking the check box again.
The
Add Delay
option is based on the unit serial number. The unit
serial number is the number of seconds added to the reporting time
specified for
Transmit report at
. For example, if you set the
reporting time to 12:00:00 and the unit serial number is 1200, the
actual reporting time is 12:20:00. This feature allows you to
configure several units with the same reporting time and also
prevents units from transmitting at exactly the same time.
4.
Choose a repeat interval option in the
And repeat every
field. If
you configured a capture time earlier, select the
24 Hours
repeat
interval option.
5.
Click
Save
.