American Dynamics Hybrid Digital Video Recorder, User Manual

Page: 53 / 160

53
When you reach the edge of the image, PTZ limit indicator will be displayed.
To get a closer view, simply use your mouse roller to zoom in. The PTZ limit indicator will disappear,
allowing you to pan the image again.
Clicking Alt and Z at the same time will enable the zoom box. You can zoom in on a particular location
by holding down the control key and dragging the zoom box over the desired portion of the image.
Clicking Alt Z again will bring it back.
You can also use your mouse to access the PTZ presets by right clicking anywhere in the PTZ Video
Panel and selecting PTZ Presets and then the name of the desired preset.
You can also use your mouse to maneuver the PTZ controls within the PTZ Video Panel. Move your
cursor to the top and center of the PTZ camera view and you should see an up arrow. Click your mouse
and the camera will move up. Move your cursor to the corner of the box and you will get a diagonal box.
By clicking your mouse the camera will now move in that direction. You can continue this process along
the remaining sides and corners of the PTZ camera display until you have positioned the camera in the
desired location.
You can zoom the camera in and out by using your mouse roller. To zoom in, roll your mouse wheel
forward one click and then quickly roll it back one click. To zoom out, roll the mouse wheel back one
click first and then one click forward. Remember, you can adjust the speed of the Zoom feature by
using the Speed slider control on the PTZ Control.