American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 19
4. Press MODE/ESC to exit.
PLAY
MAIN MENU -
RUN
Run the unit in an Auto mode as a “master” in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice by pressing ENTER, “
PASS
” will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a “master”, or
as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUDI
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice by pressing ENTER, “
PASS
” will flash
in the display and fixture will begin its function.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 15 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUTO
” is displayed, press ENTER.
4. Now you can choose between “
CLOSE
”, “
HOLD
” “
AUTO
”, or
Vizi Wash LED 108
System Menu
American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 20
Vizi Wash LED 108
System Menu
“
AUDI
”. “
HOLD
” is the default setting.
5. Select the mode that you want the fixture to run in case of a
lost DMX signal and press ENTER.
RESE
MAIN MENU -
ALL
- When you activate the reset function, the fixture will
begin the reset motion, reseting all motors.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
ALL
” is displayed.
4. Press ENTER to reset all motors, or press MODE/ESC to
cancel and return to the main menu.
SCAN
- When you activate this reset function, the fixture
will only reset the pan/tilt motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SCAN
” is displayed.
4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.
TIME
MAIN MENU -
LIFE
- With this function you can display the total running
time of the unit.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LIFE
” is displayed, press ENTER.
