TECHNICAL SUPPORT
Telephone: 0161 331 5700
E-mail:
http://www.whitecroftlighting.com
SPECIFICATION
Foil Solo LED is supplied as 2200mm long bodies in widths of 500 & 700mm and with acoustic material depths
of 30 or 46mm. Luminaires can be individually or continuously mounted & come complete with segregated wire
ways for additional service cabling. Foil Solo LED uses a positively retained permanently fixed diffuser optic
producing a 60% down, 40% up light distribution. Foil Solo is supplied with an individually adjustable wire
suspension kit and clutch retention system for direct ceiling mounting & levelling. Infill panels are available in
various sizes for continuous mounting & luminaire spacing as appropriate
Finish:
Luminaire
- Silver RAL 9006 30% gloss polyester powder-coat.
- White RAL 9010 30% gloss polyester powder-coat
Canopy/Gear Tray
- White RAL 9003 30% gloss polyester powder-coat.
Materials:
Foil Wing
- 0.9mm micro perforated mild steel
Canopy/Gear Tray
- 0.7mm mild steel.
Diffuser
- 3mm Micro Prism Acrylic within mild steel frame.
Acoustic
- 80Kg/m
3
Tissue wrapped compressed fibreglass.
Control Gear:
Fixed Output / DALI control gear as specified.
Led Options:
1200mm High or Low Output LED / 1500mm High or Low Output LED
Operating Temp: 25 °C
Supply:
240V
Connection: Unfused 2.5mm terminal block
IP Rating: IP20
FOIL single optic
LED OPTION DIFFUSER
SUSPENDED ARCHITECTURAL
LUMINAIRE
Installation Instructions
JULY 2012 - Rev B
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England
Registered Office:
As above
Exploded Isometric for
illustration purposes only.
