Vizi Wash LED 108
Controls and Functions
1. Lens Assembly -
This is a high quality lens assembly that features
36 x 3W LEDs (12 Red, 12 Green, & 12 Blue).
2. Digital Display -
This display shows the menu and operating func-
tions that you can choose from.
3. Mode/ESC Button -
This button is used to exit menus and to scroll
backwards through certain menus only.
4. Up Button -
This button is used to scroll forward when navigating
through the system menu.
5. Down Button -
This button is used to scroll backwards when navi-
gating through the system menu.
6. Enter Button -
This button is used to select and confirm a func-
tion when working in the system menu. It is also used to exit certain
menus.
7. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
8. Power Switch -
This switches the power to the fixutre “On” and
“Off”.
9. Fuse Holder -
The fuse housing stores a 8 amp (4 amp 220v) GMA
protective fuse. Never defeat the fuse, the fuse is designed to pro-
tect the electronics in the event of severe power fluctuations. Always
be sure to replace the fuse with an exact match as the one being
replaced, unless otherwise told to do so by an authorized American
DJ
®
service technician.
10. Power Cord Inlet -
This unit is equipped with a removable I.E.C.
power cord. Be sure to only use the power cord included with the
unit, this cord is designed to match the electrical requirements of the
unit. Other cords may cause the unit to overheat or malfunction. Volt-
age may vary from venue to venue, when connecting this unit to a
power supply be sure to connect to a matching power outlet. Never
use this fixture if the ground prong has been removed or broken off.
The ground prong is designed to reduce the risk of fire or electrical
shock in the event the unit suffers from an internal short.
American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 9
American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 10
11. Carrying Handles -
The includes built-in carrying handles. Be
sure to always handle the unit by the built-in handles. Never lift or car-
rying the unit by head or yoke. Pulling on or transporting the unit by
the moving head may severely damage the unit and will void the unit
warranty.
12. XLR Output Jack -
This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Vizi Wash LED 108 in the chain. For best results in DMX or
Master/Slave mode terminate this jack if it is the last unit in the chain.
See “Terminator” on page 11.
13. XLR DMX Input Jack -
This jack is used to receive an incoming
DMX signal or Master/Slave signal.
Vizi Wash LED 108
Controls and Functions
