background image

American DJ

®

  -  www.americandj.com  - Vizi Wash LED 108 Instruction Manual Page 34

 Vizi Wash LED 108 

 

 

              Error Codes

When power is applied, the unit will automatically enter a 
“reset/test” mode. This mode brings all the internal motors to a 
home position. If there is an internal problem with one or more 
of the motors an error code will flash in the display in the form 
of “XXer”, “XX” will represent a function number. For example, 
when the display shows “02Er,” it means there is some type of 
error with the channel 2 motor. If there are multiple errors during 
the start-up process they will all flash in the display. For exam-
ple: if the fixtures has errors on channel 1 and channel 3 all at 
the same time, you will see the error message flash “01Er”, and 
“03Er repeated 5 times.

If an error does occur during the initial start-up procedure the 
fixture will self-generate a second reset signal and try to realign 
all the motors and correct the errors, if the errors persist after a 
second attempt a third attempt will be made.

If after a third attempt all the errors have not been corrected the 
fixture will make the following determinations: 
1) 3 or more errors - The fixture cannot function properly with 
three or more errors therefore the fixture will place itself in a 
stand-by mode until subsequent repairs can be made. 
2) Less than 3 errors - If the fixture has less than 3 errors, there-
fore most other functions will work properly. The fixture will 
attempt to operate normally until the errors can be corrected by 
a technician. The errors in question will remain flashing in the 
display as a reminder of internal errors.

01Er – PAN movement error:
If the yoke is not located in the default position after start-up or 
after a reset command. This message will appear after a fixture 
reset, if the pan-yoke’s magnetic-indexing circuit malfunctions 
(sensor failed or magnet is missing) or there is a stepper motor 
failure (defective motor or a defective motor IC drive on the 
main PCB).

American DJ

®

  -  www.americandj.com  - Vizi Wash LED 108 Instruction Manual Page 33

 Vizi Wash LED 108 

 

 

       Editing Program

Editing procedure 3:

 

Record the selected scenes automati-

cally from external controller:

1. Access the main menu.
2. Select “

EDIT

” by pressing the UP or DOWN buttons, press 

ENTER.
3. Press the UP button until the display shows “

STEP

”, press 

ENTER.
4. Now adjust and set the number of steps by pressing the 
UP or DOWN buttons. Press ENTER to confirm the number of 
steps, and “

PASS

” will display briefly.

5. Now press the DOWN button until “

REC

” is displayed, and 

press ENTER. 
6. The display will now show “

RE.XX

”, “

XX

” stands for the scene 

number in the internal memory which the scenes from the con-
troller will be stored to. Press ENTER when you have chosen 
the scene number.
7. Call up the scenes on the controller, and the fixture will 
record the scenes from the controller automatically. After the 
number of scenes as selected in the “

STEP

” menu are loaded 

into the fixture, it will stop the procedure and return to the pre-
vious menu.
8. Press MODE/ESC to exit the “

EDIT

” menu and return to the 

main menu. 

Summary of Contents for Vizi Wash LED 108























Reviews: