background image

RECHARGEABLE 360

°

 SLIM INSPECTION LAMP 

16SMD LED + 1W LED + UV LIGHT  LITHIUM-ION 

MODEL NO: 

LED3604UV

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY  

 

9

    Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or   

 damaged 

DO NOT

 use. 

 

 

9

   Ensure the torch is fully charged before initial use. 

 

 

8

  

DO NOT

 charge in damp conditions.

 

8

  

DO NOT

 turn the torch on when it is being charged.

 

8

  

DO NOT

 shine directly into your, another person’s or an animal’s eyes.

 

8

  

DO NOT

 allow children to use the torch.

 

8

  

DO NOT

 handle or move the torch whilst it is being charged.

 

8

  

DO NOT

 use the torch if you suspect that the battery or the torch casing is damaged.

 

8

  

DO NOT

 leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently  

  recharge the battery at least once every six months of non-use.

 

8

  

DO NOT

 attempt to open, disassemble, modify or service the battery pack.

 

8

  

DO NOT

 crush, puncture, short external contacts or dispose of in fire or water.

 

9

   Recycle or dispose of used battery as stipulated by local regulation.

 

9

   If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool  

  water and seek immediate medical attention.    

2.  INTRODUCTION

Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. Exclusive patented design owned 

by and registered to Sealey. Each lamp houses 16 super bright SMD LEDs providing up to 600 lumens through the adjustable rotary switch 

and a 1W LED directional torch. Includes a four LED UV light. Slimline design with minimum thickness of 9mm. Features a single hanging 

hook, magnetic base allowing hands-free operation and battery level indicator. High quality 2.6Ah 3.7V lithium-ion battery for longer life, no 

memory effect and a much slower discharge than traditional Ni-MH batteries

3.  SPECIFICATION

Model No ............................................................ LED3604UV

Battery ........................................................3.7V 2.6Ah Li-ion

LED Quantity ........................ 16 SMD + 3W LED + 4 UV LED

Lumen Output Side (high/low)/Top ................. (600/50)/120lm

Operating time side (high/low)Top ......................(1.5/16)/10hr

IP Rating .........................................................................IP54

IK Rating .........................................................................IK07

Minimum Length ......................................................... 390mm

 

IMPORTANT WARRANTY INFORMATION

 

The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.  

 

 

We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear. 

 

If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. 

 

Under these circumstances we will not replace the battery regardless of whether the battery less than one year old. 

4.  OPERATION

4.1.    

CHARGING 

4.1.1.   

Remove USB socket cover from the side of the lamp.

 

4.1.2.   

Connect the USB lead to the port on the side of the lamp and a USB power socket. Turn on the power supply. 

4.1.3. 

  

The battery charge level LED on the side of the lamp will flash green and show the level of charge.

4.1.4.   

When the battery has fully charged all the LED’s will turn GREEN.

4.1.5.   

Switch off power supply, remove charging lead and replace socket cover.

LED3604UV   Issue:1 12/06/18

Original Language Version

© Jack Sealey Limited

   Refer to

   instructions

Reviews: