1
Outdoor
1
2
1A
3
2
4
5
Installation Instructions for
Herald Outdoor Post
1.0
OL13507
OL13507
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Insert the glass panels into the shade and secure them in place using the panel brackets and screws.
Install the fixture cover onto the fixture using the cover screws.
POST
POST SCREW
3
6
4
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
G
P
I
:
ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
LED
lamps may be dimmed with a
dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
4
FIXTURE COVER
LAMP
8
CANDLE
FOLLOWER
CANDLE
TUBE
PANEL SCREW
AND BRACKET
FIXTURE
COVER SCREW
6
5
7
8
7
8
