American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 39
Channel Value
Function
12 RESET & INTERNAL PROGRAMS
0 - 79 COLOR CHANGE NORMAL
80 - 84 ALL MOTOR RESET
85 - 87 SCAN MOTOR RESET
88 - 99 NO FUNCTION
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM
Vizi Wash LED 108
DMX Traits cont.
Vizi Wash LED 108 Fuse Replacement
The fuse holder is located at the rear of the unit next to the power cord.
Disconnect the main power. Insert a standard flat head screw driver
in to the fuse holder housing, located on the back of the unit. Turn the
screwdriver in counter-clockwise direction to remove the fuse holder.
Remove the old fuse and discard it, replace the fuse with the same
type. Insert the fuse back into it’s housing.
Vizi Wash LED 108
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to op-
timize light output. Cleaning frequency depends on the environment
in which the fixture operates (I.e. smoke, fog residue, dust, dew). In
heavy club use we recommend cleaning on a monthly basis. Periodic
cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Vizi Wash LED 108
Trouble Shooting
Listed below are a few common problems that you may encounter,
with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2. Be sure the external fuse has not blown. The fuse is located at
the rear of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 40