American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 38
Channel Value
Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 PAN FINE 16bit
3 0 - 255 TILT MOVEMENT 8bit
4 0 - 255 TILT FINE 16bit
5 RED
1 - 255 0% - 100%
6 GREEN
1 - 255 0% - 100%
7 BLUE
1 - 255 0% - 100%
8 SHUTTER & STROBE
0 - 31 LED OFF
32 - 63 LED ON
64 - 95 STROBING SLOW - FAST
96 - 127
LED ON
128 - 159 PULSE EFFECT IN SEQUENCES
160 - 191 LED ON
192 - 223 RANDOM STROBE SLOW - FAST
224 - 255 LED ON
9 DIMMER
0 - 255 INTENSITY 0% - 100%
10 RAINBOW EFFECT
0 - 7 NO FUNCTION
8 - 231 RAINBOW COLORS
232 - 255 CROSSFADING COLORS
SLOW - FAST
11 PAN/TILT MOVEMENT SPEED
0 - 225 MAX TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 255 NO FUNCTION
Vizi Wash LED 108
DMX Traits
American DJ
®
- www.americandj.com - Vizi Wash LED 108 Instruction Manual Page 37
Vizi Wash LED 108
Operation
4. Press UP, to select “
OFF
”, “
RUN
”, or “
AUDI
”. “
RUN
” will make the
unit run through a built-in program. “
AUDI
” will make the unit
sound active.
5. Select a mode, and press ENTER to confirm.
6. Press MODE/ESC if you want to return to the main menu.
7. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on pages 21-22.
Master-Slave Operation (Sound Active or Auto Program):
This function will allow you to link up to 16 units together and oper-
ate without a controller. The units can run a built-in program or run in
sound actiive mode. In Master-Slave operation one unit will act as the
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. Access the main menu.
2. Tap the UP button until
“
PLAY
” is displayed, and Press ENTER.
3.
Tap the UP button to choose between “
RUN
” or “
AUDI
”. “
RUN
” will
make the units run through a built-in program. “
AUDI
” will make
the units sound active.
4. Press UP, to select “
ALON
” or “
NAST
”. Which means stand alone,
or master/slave mode.
5. Select a mode, and press ENTER to confirm.
6. Press MODE/ESC if you want to return to the main menu
7. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on page 22.
