SD Video Recorder
7 -
2. Product Figures
2.1 Front Panel
ķ˖
SD Card Slot
ĸ˖
Status Lights (Power, Run, Alarm, SD Card, Record Status)
Ĺ˖
Stop Button: For stop recording.
ĺ˖
LANC Port: For connection to an Event Cable or a wired remote IR sensor harness (option)
:
Ļ
Infra-Red receiver window.
ļ˖
USB Port: Can be used as a secondary recording device, such as a flash memory card. This port cannot
be used as a direct access link to a PC, however.
Ľ˖
Network Port (RJ45).
Get to know the status of DVR system by the indication of LED lights:
1. PWR (Green)
2. RUN (Green)
Status/Description
Always On
Blinking
SDVR is on & running
Blinking with RUN by turns
Blinking with PWR by turns
Ignition is not enabled and SDVR is OFF.
Blinking together with RUN Blinking together with PWR Ignition sense is not enabled & SDVR is
running. Unit will turn OFF when “Delay
Time” setting is reached.
Blinking every 3 seconds
Off
Select PWR on the remote control to restart.
3. ALARM (Red)
Status/Description
On
Alarm input when BEEP is set as “ON”. Audible alarm (beep) when enabled.
Off
No alarm.
4. SD (Red)
Description
On
Writing data to the SD Card. .
Off
Not writing – inactive.
5. REC (Yellow)
Description
On
Recording data. CAUTION: Do not attempt to remove the SD card while
SYS mode is active. Select “STOP” on the front panel or remote control to
stop recording.
Off
Not recording.
