SD Video Recorder
48 -
debugged well. You may remove the Wi-Fi module from your PC, and connect to DVR’s USB and LAN
ports, power on the DVR. Meanwhile, please find a PC within the same LAN, start to Ping the DVR, and
see whether the DVR could be connected to the same wireless network or not. Note: After connecting
the Wi-Fi module to DVR, normally it takes 6~7 minutes to ping through the PC. The defaulted IP
address is 192.168.0.220 . If this is not with the same network segment of router, you’re required to
change the IP). If the DVR is ping through the computer, it means it is connected to the same wireless
network, and you can control it on software.
2)
Use the client software to control the DVR:
a)
Install supplier’s reviewing software into your PC. You will get three icons of “ViewPro”, “AVPlayer” and
“Record Calculator” on your PC desktop. “ViewPro” is used for live view, file download, set DVR remotely,
etc; “AVPlayer” is used for files playback.
b)
Run the “ViewPro”. User Name or Password is not required, just press “Enter” to log in.
c)
The software will refresh automatically and add new DVRs into the “DVR List”. If no DVR is found,
please check the network connection and refresh the list manually. When a DVR is found, please double click
to login in. By default, there is no password so you just click "Connect" to login to the DVR. You can see the
live video by double click the "channel01" or other channels.
d)
Right click the DVR and choose "setup", you can set the parameter of the DVR.
e)
Click "Remote File List" and choose the date, you can see the file list on the SD card.
f)
Choose the file and right click, you can download the file.
7. Connection & Installation Cables
7.1 Power Supply Cable
Viewed from crimp side
˖
