SD Video Recorder
11 -
3.2 Power Connection
3.2.1. Use Ignition Switch to Turn On/Off DVR System
3.2.2, Turn On / Off DVR System Automatically
NOTE
1.
The DVR uses DC power input, please be very careful when connecting to the “+” and “-” of the power
supply.
2.
Wide voltage range of 8V-32V for the DVR. The DVR may be damaged if the voltage comes too high.
And the DVR may not work if the voltage comes too low.
3.
Power of the DVR should be supplied by the car battery.
4.
Power consumption of the DVR can be 60W when the engine starts. All the cables for connecting from
power to the DVR should be thick enough for current over 5 Amperes.
5.
To protect the battery from being damaged of short circuit, the fuse should be placed very closed to the
“+” pole of car battery.
