SD Video Recorder
25 -
LABEL
Color
Description
SENSOR1
Brown
Sensor(Alarm) 1
SENSOR2
Brown
Sensor(Alarm) 2
SENSOR3
Brown
Sensor(Alarm) 3
SENSOR4
Violet
Speed Sensor
Press
<MENU>
by remote to enter the DVR system menu, choose “ALARM” and press
<MENU>
to enter
its sub-menu. Go to “ALARM ACTION” and press
<MENU>
to enter.
Taking “01+02+03” for an example, channel 1, 2 & 3 will start to record when the sensor (alarm) 3 is
triggered. The “LEVEL” is set to “HIGH”, which means the “sensor(alarm) 3” will be enabled if it is connected
to the HIGH level (+12V). If you need the “sensor(alarm) 3” to be triggered by LOW level (GND), you should
set this to be “LOW”. If you set the “TOGGLE” as “CH 01”, the screen will toggle to CH 01 in full screen
automatically when “sensor(alarm) 3” is triggered.
When alarm recording is trigged, a yellow blinking dot will be displayed on the top right corner.
Remarks for each option:
NO.:
SENSOR 1, SENSOR 2, SENSOR3.
RECORD:
Choose the channel(s) to start to record when the sensor(alarm) recording is triggered. There
are a total of 16 modes: OFF, CH 01, CH 02, CH 01+02, CH 03, CH 01+03, CH 02+03, 01+02+03, CH 04,
CH 01+04, CH 02+04, 01+02+04, CH 03+04, 01+03+04, 02+03+04, ALL.
