SD Video Recorder
35 -
1)
Connect GPS receiver to DVR system through the sensor harness:
2)
Press
<MENU>
to enter DVR system menu, choose
“MOTOR”
and press
<MENU>
to enter its
sub-menu, set the
“SPEED CHECK”
as
“From GPS”
, and press
“OK”
to save and exit.
3)
The speed will be displayed on the left bottom of the monitor. If you need the speed to be “MPH” other
than “KM/H”, please select
“mile”
in the
“PULSES UNIT”.
NOTE: If no GPS device is connected to the DVR system, speed on monitor will stay as
“0.0KMH”. To hide this information, set the “SPEED CHECK” as “OFF”.
