Amcrest General 1080P(V2) Mini 1U Series, User Manual, Page: 94 / 188

85

Pre-record: The system can pre-record the video before the event occurs and is written into the file.
The value ranges from 1 to 30 seconds depending on the bit stream.

Redundancy: The system supports a redundancy backup function. You can highlight the
Redundancy button to activate this function. Please note, before enabling this function, please set at
least one HDD as redundant. (Main menu->Setting->Storage->HDD Manager). Please note this
function is null if there is only one HDD.

Period setup: Click the button after one date or a holiday, you can see an interface shown as in
Figure 4-66 There are four recording types: regular, motion detection (MD), Alarm, MD & alarm.
Please follow the steps listed below to set the period manually.

Select a channel you want to set. See Figure 4-62.
Figure 4-62

Set record type. See Figure 4-63.
Figure 4-63

Please manually select the record period to set it. There are six periods in one day. See Figure
4-64.
Figure 4-64
Please select the corresponding recording function above the schedule. After completing all the setups
please click save button and the system goes back to the previous menu.
There are color bars for your reference. Green stands for regular recording, yellow stands for m otion
detection, and red stands for alarm recording. The white means the MD and alarm recording is valid.