Amcrest General 1080P(V2) Mini 1U Series, User Manual, Page: 125 / 188

116
4) If you login via the WAN mode, the system does not support alarm activation to open the video
function in the Alarm setup interface.
Important

For multiple-channel monitoring mode, the system uses the extra stream to monitor by default. You
can not modify this manually. All channels are trying to synchronize. Please note the
synchronization effect still depends on your network environments.

For bandwidth consideration, the system can not support monitor and playback at the same time.
The system auto closes monitor or playback interface when you are searching the setup in the
configuration interface. This is to enhance search speed.
5.8 Setup
5.8.1 Camera
5.8.1.1 Conditions
Here you can view device properties and information. These settings become valid immediately after
you set them. See Figure 5-15.
Figure 5-15
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel from the dropdown list.
Period This divides one day (24 hours) to two periods. You can set a
different hue, brightness, and contrast for different periods.
Hue This is to adjust monitor video brightness and darkness level.
The default value is 50.
The bigger the value is, the large the contrast between the
bright and dark section is and vice versa.