Amcrest General 1080P(V2) Mini 1U Series, User Manual, Page: 80 / 188

71
Figure 4-48
4.10.2.8 UPnP
The UPnP protocol is used to establish a mapping relationship between the LAN and the WAN. Please
input the router IP address in the LAN in Figure 4-. See Figure 4-49.

PAT Enable/Disable: Turn on or off the UPnP function of the device.

Status: When the UPnP is offline, it shows as
“Unknown”. When the UPnP is working it shows
“Success”

Router LAN IP: The router
’s IP in the LAN.

WAN IP: The router
’s IP in the WAN.

Port Mapping list: The port mapping list here is the
one to one relationship with the router’s port
mapping setting.

List:

Service name: Defined by user.

Protocol: Protocol type

Internal port: Port that has been mapped in the router.

External port: Port that has been mapped locally.

Default: UPNP default port setting is the HTTP, TCP and UDP of the DVR.

Add to the list: Click it to add the mapping relationship.

Delete: Click it to remove one mapping item.
Double click one item and you can change the corresponding mapping information. See Figure 4-50.
Important:
When you are setting the router
’s external port, please use a port in the range 1024~5000. Do not
use well-known ports 1~255 or the system ports 256~1023 to avoid conflict.