experience quality
.
ACN-ML
Version 1.3 / 3.48
10. LED Indications
As used to from former devices of the Clockit Time Code family, the ACN-ML has a red and a green
flashing LED to display operation and battery status:
●
red
slowly blinking: power applied, unit switched off, silent charge of backup cell
●
●
red
and
green
constantly lit: unit switched off, external power connected, backup battery
fully charged. Trickle charge current at 12V typical 35mA
0
1 2 3 4 seconds:
● ●
●
● ●
red
flashing in 1 second intervals: running, but not jammed or set.
● ●
● ● ●
green
flashing in 1 second intervals: running, jammed or set manually.
This is the normal operation mode.
●
●●
●●
red
double flash every 2seconds: battery low, not jammed or set.
●
●●
●●
green
double flash every 2seconds: battery low, jammed or set.
● ●● ●● ●● ●●
red
double flash every second: TC / video not sync, not jammed or set.
● ●● ●● ●● ●●
green
double flash every second: TC / video not sync, jammed or set.
The double flash on every second is shown while invalid combinations are configured or while syncing the genlock
signal to time code after configuration changes or jamming.
● ●●● ● ●●●
combination of not sync and low battery, not set or jammed.
● ●●● ● ●●●
combination of not sync and low battery, set or jammed.
●
●
●
●
●
●
●
●
●
●
alternating colors during firmware update.
25
