experience quality
.
ACN-ML
Version 1.3 / 3.48
MAIN MENU
Pushing the config switch briefly will replace the lower line with the
main menu. You can navigate forth and back through the various
sections by toggling the 3 function wheel in the corresponding
direction and select the highlighted sub menu by pushing again.
Pressing the config switch when EXIT is highlighted exits to the main screen. If no action is performed
the unit will revert to the main screen after a few seconds.
GEN MENU
This menu will lead you through a subset of parameters regarding the timecode generator.
GEN > JamTC
First sub-menu is to configure how the generator can be jammed from
external.
AUTO is the default setting. When activated, the screen will display an
A
to the left to the running timecode. The generator will automaticaly
jam to externally fed timecode and will not re-jam as it has consistent,
present signal displayed by a lock symbol that has replaced the
A
. It
will revert to a ready for re-jam when the external TC source stops and restarts for 3 seconds, or is
disattached for the same time.
permanently changed to a lock.
Off defeats the Jam mode completely. The generator will not react to
incomming TC. This is useful to protect your TC master becoming
accidentially misadjusted when using it to jam other equipment with a
bi-directional cable. Note the jam indicator on the main screen is
The manual/once option will let you jam the generator one time only
and is indicated by an
M
that the unit is ready to accept a TC jam. Once
jammed, the unit will switch “Off” mode with an according lock symbol.
To reopen the input for jamming with present external timecode,
repeatedly press the config switch to toggle through the modes. Of course, you can also change the
mode or reboot the unit.
15
