ACN-ML
experience quality
.
Version 1.3 / 3.48
The default of 8 dBm is globally permissible. Check if your local
regulations allow higher output before requesting a PIN.
ACN > SYNC
Selecting SYNC opens the screen for sending out a sync command to
all ACN devices that are one the same JAM mode and channel.
Depending on the mode the confirm page reads slightly different.
Default is on no; to adjust, toggle to yes and push to enter.
NOTE: Only ONE unit is allowed to send out C-JAM sync broadcasts. It is recommended to
choose the Master Lockit that also serves as metadata hub.
After sending out the sync command including timecode and user bits,
the other units reply and the number of units which replied and were
successfully synced are displayed.
After this, the display falls back to main screen. In C-JAM mode the sync is repeated every 5 seconds
and the display will indicate the transmission (or reception).
EXIT
Exits to the main operation screen
23
