experience quality
.
ACN-ML
Version 1.3 / 3.48
ACN MENU
The ACN menu accesses Lockit Network configuration.
ACN > MODE = Off
Per default this is OFF, so all options will be hidden. To change, hit
MODE and select the desired option.
ACN > MODE > JAM
The JAM
mode enables sending of a sync command to other ACN
ready devices on same mode and channel, or to receive a sync
command from them. This serves to remotely one-time jam sync all
units on the set from one arbitrary unit.
ACN > MODE > C-JAM
C-JAM, as continuous jam, builds up on jam. Repeated bursts of
timestamps are sent out every couple of seconds, jamming previously
unset devices which adjust their clock reference to the received
information and re-transmitting status information. This is also the
metadata mode and thus the one in which the Master Lockit will mostly be used, either as hub or as
satellite.
ACN > MODE > TX
This mode converts the unit into a timecode transmitter that will
distribute external TC through ACN to units in RX mode.
If progressing timecode is detected, the ACN-ML jams to it and sends out a jam command to the slaves.
When the external timecode stops, a stop command is sent to the slaves.
If static timecode value is recognized, as sent by a video camera or similar, the timecode is stopped
while a static timecode is sent on the timecode output of the slaves as well as on the output of the unit
that is in TX. This feature enables synchronized remote roll of devices that support recording triggered
by timecode.
21
