experience quality
.
ACN-ML
Version 1.3 / 3.48
7. Setup Menu Diagram
This passage will guide you through the menu structure of the Master Lockit as accessible via the three
function wheel on the top and OLED display. All TC related adjustments such as frame rate, level, and
offset, as well as selecting correct ACN settings, must be performed here.
Main Display will always show jam mode, timecode, frame rate, and power status in the upper section.
Mid-section gives sync info if applicable, lower section displays either ACN related info such as server
status, mode and channel or menu.
↓
push select switch down to enter the main or sub menu and to confirm,
↔
toggle left/right to
navigate or increase/decrease value.
↓
push again to confirm selected value. Default settings are
highlighted.
Main Menu:
GEN
↔
SYNC
↔
TC
↔
SYS
↔
ACN
↔
EXIT
↓
HH:MM:SS:FF
GEN
↓
JamTC
↔
EDIT
↔
OffSet
↔
UB
JamTC
↓
AUTO
↔
Off
↔
manual/once
Edit
↓
Offset
↓
Offset: + 00.00
+/-10 frames in 0.05 increments
UB
↓
JamUB
↔
EDIT-UB
↔
EXIT
JamUB
normal
↔
manual
↔
insert
EDIT-UB
↓
00:00:00:00
EXIT
↓
back to main menu
↓
SYNC
↓
PPF
↓
1x
↔
2x
↔
1-4 Pulses Per Frame, rising/falling edge
↓
TC
OFF
↓
↓
NO SYNC OUTPUT
PPF
↔
OFF
↓
HIGH
↔
FPS
↔
Level
11
