Operation
64
EK-S/EK-SH BAG0022.4 07.22
10.2
Spreading operation
●
The machine has been coupled onto the tractor.
•
The hydraulic hoses are connected.
•
All settings are made.
ο
Spread rate setting
ο
Spreading vane position
ο
Shutter slide rods for shutter slide A, B hooked or unhooked.
ο
EK-S
: Working width adjustment on the spread deflector
The spreading disc rev. speed is 540
U
/
min
, if there is no other
speed given in the spread rate table!
Engage the universal joint shaft at a low tractor engine speed.
Danger!
Do not approach rotating spreading discs. Danger of injury.
Danger from particles being thrown around. Advice people to
leave the danger area!
If the implement is transported over longer distances with filled
hopper, ensure a correct spread rate when starting the spreading
operation.
Maintain a constant spreading disc rev. speed and forward
speed.
Danger!
Before commencing any operation with the fertiliser spreader
ensure that all safeguards are present and fitted in the correct
position (Seite 31).
Prior to any operation ensure the proper condition of the fixing
parts, especially the fixing of spreading discs and spreading
vanes.
Headlands
Close shutter slides when turning on the headlands!
Field sides
The one-sided field side spreading is possible. To do this, re-
lease each one switch rod and deactivate shutter slide A or B,
see Seite 36.
After operation
After operation
•
Close shutter slide.
•
Switch off the universal joint shaft.
Summary of Contents for EK-S 150
Page 76: ......
