General safety advice
EK-S/EK-SH BAG0022.4 07.22
25
2.16.3 Electric outfit
•
When working on the electrical system, always disconnect the
battery (negative terminal).
•
Only use the prescribed fuses. Using unsuitable fuses will de-
stroy the electrical system - risk of fire.
•
Ensure that the battery is connected correctly - firstly connect the
positive terminal and then connect the negative terminal. When
disconnecting the battery, disconnect the negative terminal first,
followed by the positive terminal.
•
Always place the appropriate cover over the positive battery termi-
nal. Accidental grounding poses the risk of an explosion.
•
Risk of explosion – Avoid spark formation and naked flames in
the area of the battery!
•
The machine can be equipped with electronic components, the
function of which may be influenced by electromagnetic interfer-
ence from other units. Such interference can pose risks to peo-
ple, if the following safety information is not followed.
ο
If retrofitting electrical units and/or components on the ma-
chine with a connection to the on-board power supply, the
user is responsible for checking whether the installation
might cause faults on the vehicle electronics or other com-
ponents.
ο
Ensure that the retrofitted electrical and electronic compo-
nents comply with the EMC directive 2014/30/EC in the ap-
propriate version and carry the CE label.
2.16.4 Cleaning, maintenance and repairs
•
Only carry out cleaning, maintenance and repair work on the
machine when:
ο
The drive is switched off
ο
The tractor engine has come to a complete stop
ο
The ignition key has been removed
ο
The machine connector has been removed from the on-
board computer
•
Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
•
Secure the raise machine and/or raised machine parts against
unintentional falling, before cleaning, maintaining or repairing the
machine.
•
When replacing work tools with blades, use suitable tools and
gloves.
•
Dispose of oils, greases and filters in the appropriate way.
•
Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
•
Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE. This is ensured through the use
of AMAZONE original spare parts.
Summary of Contents for EK-S 150
Page 76: ......
