Maintenance, repair and care
EK-S/EK-SH BAG0022.4 07.22
67
12.2
Greasing table
•
The greasing intervals for the PTO shaft are
illustrated in hours in the opposite picture.
Also follow the shaft manufacturer´s as-
sembly and maintenance instructions at-
tached to the PTO shaft.
•
Grease the shutter slide openings after
every operation.
Fig. 25
Only use lithium saponified multipurpose grease with EP addi-
tives.
12.3
Exchanging the spreading discs
1.
EK-S
: Remove spread width reducer .
2. Remove the bolts (Fig. 27/1) and exchange
the spreading vanes.
3. Firmly retighten the bolts.
Fig. 26
Danger!
Exchange the spreading vanes if
breakages by wear are noticed.
Danger of injury from flinging bro-
ken off spreading vane parts!
12.4
Exchanging the agitator head
1. Remove the expansion pin (Fig. 27/2) from
the agitator head.
2. Pull off the agitator head in upward direc-
tion.
3. Insert new agitator head.
4. Secure the agitator head and the spreading
disc with two expansion pins.
Check distance between agitator finger and hopper wall. The
agitator finger should be positioned parallel to the hopper wall
with a spacing of 27 + 1 mm (Fig. 25).
Ensure that the agitator head does not drag along the hopper
bottom. If necessary slightly press the hopper bottom down-
wards.
Summary of Contents for EK-S 150
Page 76: ......
