Coupling and uncoupling the machine
EK-S/EK-SH BAG0022.4 07.22
55
7
Coupling and uncoupling the machine
Danger!
•
Only couple and transport the machine with a tractor which
has been designed for this task and fulfils the power re-
quirements.
•
When fitting the machine to the tractor three point linkage
the mounting categories on the tractor and the implement
must coincide.
•
When coupling tractor and implement, only use the pre-
scribed tools.
•
Standing of persons between the machine to be coupled
and the tractor is prohibited whilst the tractor is backing up.
→
Any assistants may only stay at the side of the vehicle and
help to direct it. Only when the vehicles have come to a full
standstill they are allowed to step between them.
•
When coupling and uncoupling implements, observe the
chapter "Safety advice for the operator", page 23.
Danger!
•
Be particularly careful when coupling the machine to the
tractor or uncoupling it from the tractor!
•
Before uncoupling secure the machine by using 2 chocks!
•
Observe the max. support load of the tractor!
•
Ensure that the lower link arms of the tractor three point
hydraulic are equipped with stabilising rods or chains. To
avoid sideways swing of the machine stabilise the lower link
arms of the tractor!
The EK-S
is designed for the rear three point mounting category
I.
At tractors with an off centre universal joint shaft mount the
spreader staggered to the side.
Summary of Contents for EK-S 150
Page 76: ......
