Assembly and function
EK-S/EK-SH BAG0022.4 07.22
45
WARNING
For the oil return, use only DN16 lines and select short return
paths.
Pressurise the hydraulic system only when the free return has
been correctly coupled.
Install the coupling union (supplied) on the pressure-free oil return
flow.
WARNING
Danger of infection from escaping hydraulic fluid at high pres-
sure!
When coupling and uncoupling the hydraulic hose lines, ensure that
the hydraulic system is depressurised on both the machine and trac-
tor sides.
If you are injured by hydraulic fluid, contact a doctor immediately.
5.6.1
Coupling the hydraulic hose lines
WARNING
Danger from faulty hydraulic functions in event of incorrectly
connected hydraulic hose lines!
When coupling the hydraulic hose lines, observe the coloured mark-
ings on the hydraulic plugs. Here, see "Hydraulic connections", page
45.
•
Observe the maximum approved hydraulic operating pressure of
210 bar.
•
Check the compatibility of the hydraulic fluids before connecting
the machine to the hydraulic system of your tractor.
•
Do not mix any mineral oils with biological oils.
•
Slide the hydraulic connector(s) into the hydraulic sleeves until
they are heard to engage.
•
Check the coupling points of the hydraulic hose lines for a cor-
rect, tight seat.
•
Coupled hydraulic hose lines
ο
must easily give way to all movements in bends without
tensioning, kinking or rubbing.
ο
must not rub against other parts.
1. Swivel the actuation lever on the control valve on the tractor to
float position (neutral position).
2. Clean the hydraulic plug for the hydraulic hose lines before con-
necting them to the tractor.
3. Couple the hydraulic hose lines with the tractor control units.
Summary of Contents for EK-S 150
Page 76: ......
