Maintenance, repair and care
EK-S/EK-SH BAG0022.4 07.22
71
12.5.3 Installation and removal of hydraulic hose lines
When installing and removing hydraulic hose lines, always observe
the following information:
•
Only use AMAZONE original hydraulic hose lines.
•
Ensure cleanliness.
•
Always install the hydraulic hose lines to ensure the following in
all operational positions
ο
There is no tension, apart from the hose's own weight.
ο
There is no possibility of jolting on short lengths.
ο
Outer mechanical influences on the hydraulic hose lines
are avoided.
Use appropriate arrangements and fixings to prevent abra-
sion of the hydraulic hose lines by components or from
rubbing against one another. If necessary, secure hydraulic
hose lines using protective covers. Cover sharp-edged
components.
ο
The approved bending radii may not be exceeded.
•
When connecting a hydraulic hose line to moving parts, the hose
length must be appropriate so that the smallest approved bend-
ing radius is not undershot over the whole area of movement
and/or the hydraulic hose line is not overtensioned.
•
Fix the hydraulic hose lines at the specified fixing points. There,
avoid hose clips, which impair the natural movement and length
changes of the hose.
•
The coating of hydraulic hose lines is not permitted.
Summary of Contents for EK-S 150
Page 76: ......
