6.4.11.2 Adjusting the wheel mark eradicator to the track width
1. loosen the nut
1
.
2. Move the track marker
2
to the desired position.
3. Tighten the nut.
CMS-I-00003951
6.4.11.3 Changing the wheel mark eradicator coulter
CAUTION
Risk of injury from sharp edges on the
coulters and the bolt heads
Wear gloves.
Pay attention to sharp edges.
Do not allow carriage bolts to rotate.
Different wheel mark eradicator coulters can be
installed on the wheel mark eradicator bracket
1
.
The choice of the wheel mark eradicator coulter
depends on the operating conditions.
CMS-I-00003950
Number
Wheel mark eradicator
coulter
Operating conditions
Pulling force requirement
1
Narrow coulter
Deep loosening of light soils
Low pulling force
requirement
2
Wing coulter
Shallow loosening and levelling of
medium, silty soils
High pulling force
requirement
1. Remove the nuts
3
and washers.
CMS-T-00005520-A.1
CMS-T-00005521-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
88
