1.
To determine the position for the sliding shutter,
see "Determining the setting parameters".
2.
When the fill level rises beyond the edge of the
inspection window
1
,
gradually close the sliding shutter
or
if the fill level falls below the edge of the
inspection window,
gradually open the sliding shutter
or
If gaps occur,
gradually open the sliding shutter.
3. Check the adjustment of the sliding shutter on the
field after driving a short distance.
1
CMS-I-00001916
6.4.14.3 Changing the opto-sensor and shot channel
NOTE
The opto-sensor must be adapted to the
respective operating conditions.
1. Uncouple the ISOBUS line.
2. Remove the spring cotter pin
1
.
CMS-I-00003814
CMS-T-00005387-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
96
