6.3.2 Attaching the backstop profiles for the lower links
1. Put the backstop profiles
1
on the lower link
pins
2
.
2. Secure the backstop profiles with the linch pin
3
.
11
22
3
CMS-I-00001219
6.3.3 Coupling the universal joint shaft
REQUIREMENTS
The universal joint shaft was installed
according to the manufacturer specifications
1. Open the holder
1
.
2. Pull back the drawing sleeve
2
on the tractor
side.
3. Push the universal joint shaft onto the tractor PTO
shaft.
The drawing sleeve engages.
CMS-I-00003956
6.3.4 Coupling the hydraulic hose lines
All hydraulic hoses are equipped with handles. The
handles have colour markings with a code number
or a code letter. The markings are assigned to the
respective hydraulic functions of the pressure line
of a tractor control unit. Stickers are applied on
the implement for the markings, which illustrate the
respective hydraulic functions.
The tractor control unit is used with different types of
actuation, depending on the hydraulic function:
CMS-I-00000121
CMS-T-00001398-A.1
CMS-T-00005462-A.1
CMS-T-00007871-A.1
6 | Preparing the machine
Coupling the implement
MG6967-EN-II | C.1 | 27.09.2021
59
