REQUIREMENTS
The fertiliser hopper is at least
1
/
4
full with
fertiliser
1. Switch off the fan.
2. Release the lock
2
and swivel it downwards.
3.
To take the calibration buckets out of the
parking position on implements with hydraulic
fan drive,
pull out the interlocked calibration buckets
1
to
the side.
or
To take the calibration buckets out of
the parking position on implements with
mechanical fan drive,
pull out the calibration buckets individually to the
side on the left and right.
CMS-I-00001932
4.
To move the calibration buckets into calibration
position on implements with hydraulic fan
drive,
slide the calibration bucket
2
under the metering
unit with the opening facing up.
5. Hook on the calibration bucket
1
with the
opening facing up and slide it under the metering
unit.
or
To move the calibration buckets into calibration
position on implements with mechanical fan
drive,
slide the calibration buckets individually under the
metering units from the left and right.
CMS-I-00001931
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
134
