6.4.11 Preparing the pivoting wheel mark eradicator for operation
6.4.11.1 Adjusting the working depth of the wheel mark eradicators
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1. Raise the implement.
2. Release the linch pin
1
.
3. Remove the locking pin
2
.
4. Hold the wheel mark eradicator
3
.
5. Remove the linch pin and locking pin
4
.
CMS-I-00003952
6. Move the wheel mark eradicator
1
to the
desired position.
7. Secure the wheel mark eradicator with the locking
pin
2
.
8. Secure the locking pin with the linch pin
2
.
9. Insert the locking pin on the opposite side.
Secure with the linch pin.
CMS-I-00003945
CMS-T-00005518-A.1
CMS-T-00005519-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
87
