Amazone KE 2501 Special, Operating Manual

Page: 74 / 174

Structure and function
74 KE/KX/KG (RIGID) BAH0089-7 02.2020
5.8.1 Tool tine minimum length
The tool tines are subject to wear. Replace the
tines

once they reach
the minimum length L = 150 mm.

before they reach the minimum length when
working at great working depths, in order to
prevent damage/wear to the tool carriers.
If the tines fall below the minimum length pre-
scribed by the manufacturer, claims due to rock
damage shall not be accepted.
Fig. 50
5.8.2 Stone release
The tool tines (Fig. 51/1) are fastened to the
sockets (Fig. 51/2) of the tool carriers.
The sockets are shaped in such a way that the
tines have a spring action and can avoid rocks
and other obstacles.
Fig. 51