![Amazone KE 2501 Special Operating Manual Download Page 28](http://html1.mh-extra.com/html/amazone/ke-2501-special/ke-2501-special_operating-manual_2919764028.webp)
General Safety Instructions
28
KE/KX/KG (RIGID) BAH0089-7 02.2020
2.16.2 Mounted implements
When attaching to the three-point linkage, the attachment cate-
gories on tractor and implement must be compatible or an
adapter must be used!
Take note of the manufacturer's instructions.
Before attaching implements to or removing them from the three-
point suspension, shift the operating equipment to a position in
which unintended raising or lowering is impossible.
There is a danger of crushing or shearing injury around the
three-point linkage.
The implement may be transported and towed only by the trac-
tors intended for this purpose.
There is a risk of injury when implements are coupled to and
uncoupled from the tractor.
Do not step between tractor and implement when operating the
external control for the three-point attachment!
There is a danger of crushing and shearing injury when operat-
ing the support devices.
When mounting implements at the front or rear of a tractor, do
not exceed
The permissible total tractor weight
The permissible tractor axle loads
The approved load capacities of the tractor tyres
Observe the max. payload of the mounted implement and the
permissible axle loads of the tractor!
Always ensure that the tractor lower links are adequately locked
against sideways movement before transporting the implement.
The operating lever for the tractor lower link must be locked
against lowering when driving on roads.
Shift all equipment into the transport position before travelling on
the road.
Any mounted implements and ballast weights affect the han-
dling, steering and braking of the tractor!
The tractor front axle must always be loaded with at least 20 %
of the tractor empty weight, in order to ensure sufficient steering
power. Apply front weights if necessary!
Only ever carry out any servicing, maintenance or cleaning op-
erations or remedy malfunctions with the ignition key removed.
Leave safety devices attached and always position them in the
protective position.
Summary of Contents for KE 2501 Special
Page 71: ...Structure and function KE KX KG RIGID BAH0089 7 02 2020 71 Fig 43...
Page 171: ...Cleaning maintenance and repair KE KX KG RIGID BAH0089 7 02 2020 171...
Page 172: ...Notes 172 KE KX KG RIGID BAH0089 7 02 2020 13 Notes Space for your notes...