Amazone KE 2501 Special, Operating Manual

Page: 123 / 174

Settings
KE/KX/KG (RIGID) BAH0089-7 02.2020 123
8.6 Adjusting the levelling board
To adjust the levelling board to the desired
height, proceed as follows:
1. Remove the operating tool from the parking
position (Fig. 61/1, see page 78) and fit in
on the adjustment device (Fig. 127/1).
Fig. 127
CAUTION
Danger due to the operating tool
swinging out!
Before releasing the locking mecha-
nism, hold the operating tool (Fig
.
127/3) in position with a firm grip!
2. By turning the operating tool (Fig. 127/3),
offload and unlock the locking teeth (Fig.
127/2).
3. Adjust the levelling board to the desired
height by turning the operating tool.
For plough seeding, adjust the levelling
board such that a small ridge of soil is al-
ways pushed ahead of the bar to even out
any undulations.
For mulch seeding, adjust the levelling
board high enough for crop residues to be
able to pass underneath.
4. After the adjustment procedure, the locking
teeth must latch in completely (Fig . 128/1).
Fig. 128